Planning and working on the water channel for the house must be done properly to prevent the water channel from being blocked or not running smoothly. If not done properly, unpleasant odors can appear, mosquitoes nest and various disease-causing pathogens will appear. In addition, improper preparation can also lead to leaky pipes and various technical problems that only the sewer line repair companies in denver service can handle.
Just like the electrical system, the planning of the plumbing should be consulted with a professional. But as an overview, here are some basic tips when going to make a water channel that you can use as an initial reference.
– Using Quality Pipe. There are many types of pipes available in the market for plumbing needs, one of which is Poly Vinyl Chloride (PVC). PVC is usually used to drain clean water, used water, drainage, and rainwater. PVC pipe is quite widely used because of its economical price, as well as its lightweight, non-rusting, flexible, acid-alkali-resistant, non-conducting character, and easy installation. There are many types of PVC pipe that you can choose from, but PVC AW pipe is the most recommended. AW pipe has a size of 1.6 to 6.4 mm and is usually used to channel clean water (from suction to tap water). The strong structure of this pipe can withstand pressures of up to 10 kg/cm2 so that high water discharges can be safely facilitated.
– Paying attention to the slope of the pipe. The next thing you need to understand when making plumbing for the house is the slope of the pipes. For this type of sewer pipe (bathroom, laundry, and kitchen water), you can install with a slope of up to 5% with a small number of taps. This is because the sewers are generally traversed by solid substances. The slope calculation starts from the length of the horizontally installed pipeline. For example, the dirty water pipe used has a length of 20 meters. When using a maximum calculation of 5%, the implemented slope is 1 m (obtained from 5% x 20 m).